DS1093-162A
36
2.4.7.2
DST Set
Enter into the interface shown as above and you are allowed to set DST status and mode.
2.4.7.3
Network Time Protocol (NTP) Service
Click [Main menu
System
General
NTP] to enter into the interface shown as below:
•
NTP Service
: Allow you enable/disable the NTP function.
•
Server Address:
currently support three servers, including time.windows.com, time.nist.gov and pool.ntp.org.
•
Time Zone:
System supports thirty Time Zones.
•
Update now:
Click [Update Now] button to change the above NTP set.
Note:
The above change will be available only when system connected to internet. And When NTP function is set to
“Enable”, system will calibrate the time at every 00:07:50 and every start-up.
2.4.7.4
Users
Click [Main Menu
System
users] option and then enter into the interface shown as below:
The model supports up to seven users with one Admin and seven users.
