DS1093-162A
27
b)
Set the ports on the DVR and port-forward of the same ports to the router. There are two different ways to do
this:
Automatic mode: If the UPnP function is supported and enabled on the router, simply enable the
function also on the DVR on the bottom of the “Menu
Network” page (see below).
Manual mode: if the UPnP function cannot be used, manually set port-forwarding on the port-
forwarding (or virtual server) table of the router.
IMPORTANT NOTE:
The firewall of some routers could block forwarding of the ports set on port-forwarding
tables. Carefully check the firewall settings of your router too.
When selecting PPPoE form the Type, user can input user name and password provided by ISP and set Media and Web
port. And now you can visit your remote DVR by using the IP address captured after registering a domain name and web
port and connect to your DVR via public network.
Friendly Reminder:
•
All the parameters you set are available only when you click [Apply] and after system are restarted.
If
3G
is selected, the DVR can connect to the web using the USB drive supplied by the major 3G telephone operators.
This function is currently not available (for future developments only).
2.4.4.2
Router’s Port Forwarding
Port forwarding is required when you want to access the DVR connected to the router from outside of the router’s network.
If PPPoE is selected, port forwarding is not required.
