urmet domus 1083/40, Manual

Page: 15 / 35

28
DS1083-017
29
DS1083-017
or, if the device has not answered:
MCM POLL.
ABSENT !!
ID CODE: 2
By selecting with the buttons and (18) the value 3, the display shows the following screen:
SCM POLL.
ADDRESS: 0
ID CODE: 03
Enter the ID code of the secondary call station, press the button (7), enter the address and press
the button (7) to poll the device; after few seconds, the display will show the device status and FW
version:
SCM POLL.
PRESENT FW: 3.0
ADDRESS: 0
ID CODE: 03
or, if the device has not answered:
SCM POLL.
ABSENT !!
ADDRESS: 0
ID CODE: 03
•
DEFAULT VALUES AND RESTORE
The switchboard factory defaults are:
Language: Italian
Busy time: 30 seconds
Monitor presence: no
System con fi guration: no
Call repeat: disabled
Communication interruption: no
Power-on password: no (000000)
User code type: physical
Function buttons: not programmed
To restore these values, unpower the switchboard, keep the buttons X, 8, 6 pressed and power the
switchboard on waiting for few seconds. This operation does not delete the name directory.
PROGRAMMING VIA PC
The switchboard is provided with a USB port for easy programming of con fi guration data and name
directory.
Access the con fi guration menu by keeping the button SHIFT (16) pressed and pressing repeatedly and
quickly the button (4).
Connect the switchboard to the PC where the software 2Voice_PC has been installed (it can be downloaded
from www.urmetdomus.com) and perform the programming procedure described in the instruction manual
of 2Voice_PC software.
DESCRIPTION OF CONNECTIONS
]
LINE connection to 2Voice system
]
POWER dedicated power supply 1083/20 connection
S+
}
call repeat signal
S-
TECHNICAL CHARACTERISTICS
Power supply (POWER): 48Vdc ±10%
Max. current consumption:
140mA
Max. switching voltage (S+, S-): 30Vdc
Max. switching current:
100mAdc on resistive load
Operating temperature range: -5 ÷ 45°C