urmet domus 1083/40, Manual

Page: 12 / 35

22
DS1083-017
23
DS1083-017
System configuration in column = NO
switchboard
power supply
power supply power supply
power supply power supply
main call stations
secondary
call
stations
secondary
call stations
column
interface
column
interface
door units
interface
CALL REPEAT (S+, S-)
In this screen the user can de fi ne if the ringer repeat must be activated or not and if this must be activated
only for special call types; the following screen appears:
S+ S-
(0=NO,1=EX,2=IN,3=A)
1
The values selectable with the buttons and (18) are:
0 call repeat on S+ and S- disabled
1 call repeat on S+ and S- enabled only for calls coming from main call stations
2 call repeat on S+ and S- enabled only for calls coming from apartment stations
3 call repeat on S+ and S- enabled for all the calls
Press the button (7) to con fi rm and go to the next screen.
COMMUNICATION INTERRUPTION
In this screen the user can de fi ne if the interruption of a call during off-hook waiting time or assured
communication time must be enabled or not.
During a call, a conversation, or an auto-on function with or without audio, the involved column or, more
in general, the system devices in busy state, can be interrupted or not by a call coming from a call station,
according to the con fi guration of this switch.
INT. COMM.
(0=NO , 1=YES)
0
To set this parameter, use the buttons and (18) and press the button (7) to con fi rm and go
to the next screen.
This value must be the same as that con fi gured in system call stations.
POWER-ON PASSWORD
In this screen the user can set the password required when the switchboard is turned on.
PASSWORD
000000
Press the button X (13) to delete the current password and enter the new one, using the numeric keypad
(12). The password can be composed by 6 numeric characters max.
If the user does not want to protect the switchboard power-on with a password, set it to 000000.
When the parameter has been con
fi gured, press the button (7) to con fi rm and go to the next screen.
USER CODES TYPE
In this screen it is possible to con fi gure the user code type, physical or logical.
Physical code: users are called with a 5-digit code as follows: ccnnn, where cc indicates the riser column
(from 00 a 31) and nnn indicates the number of the apartment (from 000 a 127)
Logical code: users are called with a a number of 1 to 4 digits from 1 to 9999. To use the logical codes,
the names must be programmed, assigning the logical call code to the physical code of the apartment.
CODE TYPE
(0=PHYSIC, 1=LOGIC)
0
To set this parameter, use the buttons and (18) and press the button (7) to con fi rm and go
to the next screen.
In order to use logical code type, each code must be associated to a physical code in the directory.
–
–
§