sec.3h
−−−−
5
2 VOICE - Technical Manual
CALL MODULE
DIGITAL CALL MODULE Ref.1083/19 (2 Modules)
PROGRAMMING
secondary module.
Two main stations cannot have the same ID. Two secondary
stations may have the same ID but must have a different number
(see next parameter).
The ID of the secondary door unit must be the same as the riser
column ID set in the Ref. 1083/50 riser column interface.
Secondary
In the case of a secondary module and if there is only one secondary
in the riser column, set 0; if there are 2, set 0 and 1 in the two
secondaries.
Code type
Type of user call code.
Physical code: users are called with a 5-digit code as follows:
ccnnn, where cc indicates the riser column (from 00 a 31) and
nnn indicates the number of the apartment (from 000 a 127)
Logical code: users are called with a a number of 1 to 4 digits
from 1 to 9999. To use the logical codes, the names must be
programmed, assigning the logical call code to the physical code
of the apartment.
Device type
Indicates whether the module is equipped with local camera unit.
Video: a local camera is connected to the “VIDEO MODULE”
connector; the call station is a video door phone. Up to 4
surveillance cameras, which can be displayed by users using the
auto power-on key, can be connected to the V3/V5 input.
Audio: no local camera unit is connected to the “VIDEO MODULE”
connector; the call station is a door phone. Up to 4 surveillance
cameras, which can be displayed by users using the auto power-
on key, can be connected to the V3/V5 input. In the case of a
single surveillance camera, the call station becomes a video
door phone and uses this camera in the call phase.
Busy time
This is the guaranteed communication time. The values (in seconds),
which can be selected with the arrow keys, are 01, 10, 20, …, 70.
The guaranteed communication time must be programmed in
the same way for all system call stations.
Stopable
During auto power-on or an intercommunicating call or consultation of
the video door phone answering service, the riser column concerned
or the entire system is in Busy status which, according to how this
parameter is programmed, may or may not be interrupted by a call
from the door unit.
The parameter “interruption” must be programmed in the same
way for all system call stations.
Door lock T1
Maintenance time of the main entrance electric lock (terminals SE+/
SE-) and of activation of terminals C/NC/NO. Enter a number (in
seconds) from 1 to 90.
Door opener 1
Electric lock control may be “protected by privacy feature” or
“unrestricted”. The door unit behaves as follows in the two cases:
Secret (Private): pressing the door-opener button of an apartment
station, the electric lock of the call station is released only if a call
has been received or a voice conversation is in progress with
this or if, following auto power-on, it is in video connection with
this.
Free (Unrestricted): pressing the door-opener button of an
apartment station, the electric lock of the door unit is released
only if this has been con
fi
gured as main, or the user belongs
to the riser column of the same secondary door unit. This riser
column is de
fi
ned by the ID of the secondary door unit. This
function is normally used on secondary stations.
Door lock T2
Activation time of the vehicle entrance electric lock (SE2 terminals).
Enter a number (in seconds) from 1 to 90.
–
–
•
•
–
–
•
–
–
•
§
•
§
•
•
–
–
•
Door opener 2
The electric lock may be controlled in “private” or “unrestricted”
mode. The door unit behaves as follows in the two cases:
Secret (Private): pressing the door-opener button of an apartment
station, the electric lock of the call station is released only if a call
has been received or a voice conversation is in progress with
this or if, following auto power-on, it is in video connection with
this.
Free (Unrestricted): pressing the door-opener button of an
apartment station, the electric lock of the door unit is released
only if the door unit is con
fi
gured as main, or the user belongs
to the riser column of the same secondary door unit. This riser
column is de
fi
ned by the ID of the secondary door unit. This
function is normally used on secondary stations.
Password
Password for accessing con
fi
guration and programming of call
module data.
Set a value from 1000 to 9999 (default 1000).
Control cameras
Number of surveillance cameras connected to terminals V3/V5 (if
more than one, via the 1083/69 video switch).
LCD contrast
Press the UP key to increase contrast and the DOWN key to reduce
this.
Button sound
The button sound function can be disabled.
Day
With the arrow keys, select the day of the week to be programmed in
the internal calendar.
Time
Enter the time to be programmed on the internal clock.
Postman function
If the function is enabled, the main entrance can be opened simply by
pressing the
key on the days and at the time set in the following
screen pages. The function can be enabled for each day of the week,
also de
fi
ning the related time band.
On exiting con
fi
guration, a check is made on whether the system
already comprises a device of the same type with the same ID and, if
secondary, with the same number (0 or 1). If so, the following message
is displayed:
ERROR ID
In this case, return to con
fi
guration and correct the error.
•
–
–
•
•
•
•
•
•
•
DIGITAL CALL MODULE
Ref. 1083/19
