ACCESSORIES
sec.4c
−−−−
5
2GO! - Technical manual
Go to any user and press the door opener button. The LED will go
out to indicate that programming is over.
2. Operation following pressure of the switchboard calling
button on an apartment station
The service can be activated by pressing the switchboard call
button on apartment stations with handset off-hook.
The apartment station switchboard call button /
/
on the
video door phone or 2 on the door phone can be used for this
function only when the handset is off-hook and not following a call
providing if was not programmed for the intercom call function.
If this button was programmed for intercom call functions, the
switchboard call function is lost. In this case, restore the bracket
default settings, program the intercom function on another button;
alternatively, activate the special decoder by means of another
event.
The PE dip switches may be arranged in any position but the COD
switch must be OFF:
ON
DIP
4
3
2
1
5
ON
3
2
1
ON
2
1
ON
DIP
4
3
2
1
5
ON
PE
NA
INF
SUP COD M/T
PROG
TIMER
OFF=M
ON=T
ON
ON
Sch.1082/80
NC
C
Z
PC
LINE
ON
3
2
1
At this point, the group of users which must activate the special
decoder by pressing the switchboard call button must be de
fi
ned.
This group must coincide with the users comprised when the
code set in INF and that set in SUP.
1
2
3
4
LINE4
LINE3
LINE2
LINE1
LINE0
9
8
0
INF= 0
SUP= 8
Ref. 1082/80
TC
In the con
fi
guration example shown, the users with code from 0
to 8 can switch the special decoder relay while this function is not
allowed to users with code 9.
The last operation is self-learning of the “switchboard call button
pressure” event. Press the special decoder programming button.
The LED will start blinking.
ON
DIP
4
3
2
1
5
ON
3
2
1
ON
2
1
ON
DIP
4
3
2
1
5
ON
PE
NA
INF
SUP COD M/T
PROG
TIMER
OFF=M
ON=T
ON
ON
Sch.1082/80
NC
C
Z
PC
LINE
Go to any user, pick up the hanset and press the switchboard call
button. The LED will go out to indicate that programming is over.
3. Operation following pressure of the staircase light button on
an apartment station and/or door unit
This service can be activated by pressing the staircase light
function button after receiving a call or during a conversation on
an apartment station.
The apartment station staircase light button is the
/ /
on the video door phone or 3 on the door phone. It assumes
this function only after receiving a call, in auto-on mode or in
audio mode. The service can also be activated by pressing the
programmed “staircase light” function button (see below) on
apartment stations.
The position of the PE dip switch is not relevant for operation
using an apartment station button but the COD switch must be
OFF:
ON
DIP
4
3
2
1
5
ON
3
2
1
ON
2
1
ON
DIP
4
3
2
1
5
ON
PE
NA
INF
SUP COD M/T
PROG
TIMER
OFF=M
ON=T
ON
ON
Sch.1082/80
NC
C
Z
PC
LINE
ON
3
2
1
At this point, the group of users which must activate the special
decoder by pressing the staircase light button must be de
fi
ned.
This group must coincide with the users comprised when the
code set in INF and that set in SUP.
SPECIAL DECODING Ref. 1082/80
PROGRAMMING
SPECIAL DECODING
Ref. 1082/80
