urmet domus 004A, Instructions Manual

Page: 25 / 62

DS1093-038 84
4.2.8
ALARM SET
Click [Main Menu Device Alarm] to enter into the below window.
Channel select: the option allows you select one channel you want.
I/O Status: allows you select the three options – NO (Normal Open), NC (Normal Close) and OFF. Set to “Normal Open”,
I/O status Alarm will be activated while sensor is ON; set to “Normal Close”, I/O status alarm will be activated while sensor
is OFF; set to “OFF”, I/O status alarm will not be triggered.
Copy To: it is possible to copy Alarm Setting for some or all channels.
ALARM CONFIG
Click [Alarm Config] on the bottom of the [Alarm set] window to enter into the interface.Now you are allowed to set detailed alarm
parameters.
In Alarm config is possible to select/deselect for each event type (Motion Detection, Alarm input, Video signal loss, HD full, HD
loss) the signal type by choosing among the following:
BUZZER
OUTPUT
EMAIL (only for Motion Detection, I/O Alarm)
FULL SCREEN (only for Motion Detection, I/O Alarm)
In Alarm config is possible to select the Event Time:
Buzzer time : you can set how long the buzzer will sound when motion is detected (0s, 10s, 20, 40s, 60s);
Alarm Output : you can set how long the external sensor alarm will last when motion is detected (off, 10s, 20s, 40s, and
60s);
Alarm time : you can set how long alarm record will last when alarm ends (0s, 30s, 1minute, 2minute, 5minute);
Pre-record time : you can set how long record will last before alarm occurs (Off, 10s).
Alarm Type Function
Motion Detection
When an object moves into motion detection area, alarm will be triggered. You can adjust sensitivity
level to suit the needs of your actual application environment.
I/O Alarm
System can convert alarm signal triggered by external sensor into signal identified by system.
HDD Loss
/ HDD Space
When Hard Drive is not detected (HDD damage, power supply malfunction), or HDD auto-overwrite
is off, and free space is not enough, an alarm will be triggered.
Video Loss
Sends alarm when DVR can’t receive video signal (such as camera damage, cable broken or
damaged or power supply malfunction).
Record Alarm setting
Please refer the below matrix: “ ” stand for “only alarm but no record”; “AMR” stand for “alarm record”; “NLR” stand for
“normal record”; and “NOR” stand for “ no record”. Once alarm is triggered, alarm icon will occur, and when many alarms are
triggered, alarm remarks will occur on the screen.
Record Mode
Scheduled recording
Record alarm setting Alarm icon Record after
power on
AMR NLR NOR
Manual Record
MD alarm AMR AMR NLR NLR
I/O triggered alarm AMR AMR NLR NLR
HDD loss, HDD Full
Alarm
mode
Video Loss Video Loss
In the record mode, [ ] icon or [ ] icon will appear on the screen. But when [ ] icon and [ ] icon appear on the screen
that means a motion alarm is triggered. When [ ] icon appears on the screen, that means HDD alarm has occurred.