URIPHON wireless 2, Instructions For Use Manual

Page: 13 / 28

13
Abb. 11c: Acivate / Deactivate Vibration Alarm
Fig. 11d: Inserting the CR2450 button battery
Pairing of the Transmitter to the Receiver (Pairing mode):
•
Press the operating button on the Receiver (fig. 5) for approx. 3 seconds and
then release.
•
You will hear a short double beep and both LED displays light up for the
Transmitter (orange - drop icon and red - battery symbol). (Fig. 5)
•
Now briefly press the "Pairing button" on the Transmitter (Fig. 4)
•
You will hear another short double beep, which acknowledges and confirms
the pairing on the Transmitter. Both LED displays go out.
•
Now Transmitter and Receiver can communicate.
Vibration Alarm “On“
Vibration Alarm “Off“