URIPHON wireless 2, Instructions For Use Manual

Page: 7 / 28

7
Fig. 4: Transmitter, back
Receiver
Fig. 5: Receiver, front
Important note:
All the important functions of the appear exclusively on the receiver .
It is recommended that the batteries are installed when operating with the power
supply. This means that the device will continue to work continuously e.g. during a
power outage. The batteries will only be used when operating without a power supply
feed.
Depending on the number of alarms triggered and on the respective alarm duration,
the capacity of the batteries extends for several months.
LED display for the operating mode of the
Receiver:
No display: The device is running on battery
and the battery is charged
Red LED flashes: The Receiver batteries
have to be replaced
Green LED: Device running on power supply
Beeper
Label, e.g.
for name or room number
LED indicators for the
Transmitter and pairing mode:
Only orange coloured LED (drop
symbol) is lit: The alarm is triggered, the
sensor is wet
Only red LED (battery icon) flashing :
The battery of the Transmitter is weak
and must be replaced.
Both LEDs are lit: The device is in
pairing mode
Function button "alarm stop" and
“Pair transmitter”