Function Motion(Timer Mode)
In mode = A timer mode of operating by setting cycle and step (see Table #2)
(Must disconnect the temp sensor for using timer mode)
If sensor is snapped while the sensor mode has been used, the senor mode is converted to the timer mode automatically.
TIMER Function
* Must disconnect the temp sensor for using timer functions.
Push
∨
and
∧
keys simultaneously for 3 sec, ‘tn' displays. Push
∧
key once again, the ‘EN’ displays. ‘EN’ as the mode by sensor is same to the present mode. Push
∧
key once again, then ‘In’ displays. At this time push
∨
and
∧
keys simultaneously, then the present cycle value displays. For setting cycle, use
∨
or
∧
key. After setting the
cycle value, push
∨
and
∧
keys simultaneously, then ‘AU’ flickers, the cycle value is saved, and the present intensity displays.
How to set (serviceman) = push
∨
and
∧
keys simultaneously– ‘tn’ displays on the screen- select ‘tin’ - push
∨
and
∧
keys simultaneously–Cycle value d splays(Cycle) –
select Cycle (basic 3 min)
- Set cycle value - push
∨
and
∧
keys simultaneously - ‘AU’ flickers – saved
* It is recommended for the end-user not to set.
How to use by the end-user = select the intensity to be used with
∨
and/or
∧
key (basic single-step)
Step
Output (0N)
Output (OFF)
Remarks
1
15 sec *
S
45 sec *
S
※
S:
Selected cycle value
In case of 1 min,
S
=1
In case of 3 min,
S
=3
In case of 5 min,
S
=5
*
*
※
(in case of 20 min,
S
= 20, value multiplying by 20)
※
(in case of 60 min,
S
= 60 , value multiplying by 60)
This will be the length of ON and OFF
2
20 sec *
S
40 sec *
S
3
25 sec *
S
35 sec *
S
4
30 sec *
S
30 sec *
S
5
35 sec *
S
25 sec *
S
6
40 sec *
S
20 sec *
S
7
45 sec *
S
15 sec *
S
8
50 sec *
S
10 sec *
S
9
50 sec *
S
10 sec *
S
10
50 sec *
S
10 sec *
S
Table # 2