22
Caution
The firmware update process may take longer than 5 minutes. Please do
not disrupt power or process during BIOS update. If interrupted, the
system will become useless. U-Reach will not be held responsible for any
damages.
6.8 Calc. CRC64
This function will count the CRC64 value for the source port.
6.9 A2 Fake Picker
Checks the capacity of each device as it’s claimed. A2 failure means the real capacity is
different from its claim.
Step 1: Execute the function.
Insert flash device in any port, select [6.9 A2 Fake Picker], then press "OK". Within 5-10
seconds, the system will determine the real capacity of flash and display the information on
the LCD monitor.
Step2:
Check the status of each port.
When the red error light illuminates, you can use the
▲▼
to view error information.
6.10 Release Protect USB
(Available in Golden Series)
Below functions release write protected USB drives. Insert flash device in any port, select
[6.10.1 Do Release Protect] or [6.10.2 Delete CD Partition], then press "OK". Within 5-10
seconds, the system will release write protected USB drive(s).
Note
l
Requires W-mode USB drive(s).
l
This function is not executable on the source port.
l
Data will be deleted after releasing write protection.
l
If it is not supported USB, it will show error message “USB chip Not
Support!”
6.10.1 Do Release Protect
(Available in Golden Series)
This function releases Whole Write Protected USB drive(s)
Caution
User is responsible for verification of targets’ quality. Testing a few
completed targets in a mass production environment for quality control is
recommended.
