6
Total Control 2.0
HDA-8100
Owner’s Manual
6
Total Control
HDA-8100
Owner’s Manual
Installation Instructions
The HDA-8100 Multi-Zone Amplifier comes with rack-mounting ears and can be installed
in a
2U rack space
.
Installing the HDA-8100 in a Rack:
1. Using a
cross-head
screw driver, remove the HDA-8100’s feet from the
bottom of the device.
2. Attach the
rack ears
to the left and right sides of the amplifier using the
supplied screws.
Align the rack ears to the sides of the HDA-8100 aligning the three (3)
screw inserts with the slots on the left and right sides of the devices.
Turn all three (3) cross-styled screws clockwise until the rack ears are
secured onto the device’s chassis.
3. Install into the rack (
2U rack space
) and connect cabling.
4. Use the supplied cross-styled screws (4) to secure the HDA-8100 (with rack
ears installed) to the equipment rack.
CAUTION!
To prevent damage,
maintain adequate ventilation
space to the sides of the amplifier.
Amplifiers can be
stacked vertically
, but assure that
the device is NOT placed next to other components or
against the side of a cabinet. Doing so may block
ventilation openings.
