5
Total Control 2.0
HDA-8100
Owner’s Manual
5
Total Control
HDA-8100
Owner’s Manual
Rear Panel Description
Below are the available connections on the rear of the HDA-8100:
1. LAN:
Full duplex gigabit
LAN
(only), for audio streaming and zone control (Wi-Fi
NOT available, device must be hard-lined to the network.
2. Audio Inputs:
The HDA-8100 Multi-Zone Amplifier contains eight (8) inputs:
•
Inputs 1-6:
RCA (single ended) stereo inputs
•
Inputs 7 & 8:
Either RCA stereo input or Digital Coax input can be used.
This setting is configured within the Total Control programming software.
Inputs 7 and 8 can only be used as analog or digital,
not both
.
3. Assignable Preamplifier Outputs:
Two (2) assignable preamplifier outputs,
each with 12V programmable triggers are capable of 150mA of current.
4. Zone Speaker Outputs:
Supports up to eight (8) stereo zones, 16 mono zones,
or any combination of stereo/mono zones (phoenix connector).
5. AC Main Power:
Connect the supplied power cable to provide the HDA-8100
with power.
Slotted-styled
screws are
used to secure the speaker wire
to the terminal block/phoenix
style connector.
1
2
3
5
4
Digital inputs
down-mix a
Dolby 5.1
or
DTS 5.1 bitstream
to stereo without any loss of
channel information.
