7
REPLACEMENT OF THE REAR WHEEL
Tools needed: 1 pc screw driver, 1 pc 12--14mm open spanner, and 1 pc 13--15mm open spanner.
Take note of the location of the parts on the rear wheel and make
sure all these parts are in their correct position when re-mounted.
REPLACING THE REAR WHEEL
REPAIR AND SERVICES
Loosen the locking screws
on the motor cover using a
Philips screwdriver and
take off the cover.
Loosen the fixing screws using
Philips screwdriver
Remove the rear wheel axle
nut using a 13mm and a
14mm solid spanner.
Mount the replacement rear
wheel assembly onto the
frame by inserting the
assembly into the rear wheel
axle housing by reversing the
operation described in step 2
above.
Make sure the rear wheel
axle has slid home in the
rear wheel axle housing on
the frame. Then tighten the
motor fixing screws using a
Philips screwdriver.
Tighten the rear wheel axle
nut with a 13mm and a
14mm spanner and then
check that the wheel is able
to rotate freely
Mount the motor cover using
a screwdriver. Do not overs-
tighten the screws or the
motor cover might be
damaged.
