© Urban Coop Company, all rights reserved.
© Urban Coop Company, all rights reserved.
Optional Waterer Install
Assemble Sides to Back Run Panel
Fig 1
Make the top edges of one X1 extensions side panel flush with the A2 back run panel. The side panel
angle will be controlled by the top edge and side angles of the A2 back run panel (now your back run extension
panel).
Fig 2
Using two X4 brown screws, attach A2 back run panel to X1 extension side panel via pre-drilled holes.
Repeat for other side.
X2
Using eight X4 brown screws into the pre-drilled holes, attach X3 top panel, wire side down, to the side and back
assembly. Move top around on assembly as necessary to make all edges flush. This will control the width of your
run extension where it meets up to the coop.
Attach Run Extension Top
X3
Fig 1
Fig 2
