URAL Motorcycles cT 2022, Owner'S Manual

Page: 84 / 104

ELECTRIC STARTER
The starter must provide 300-400 rpm to start the engine and requires a well
maintained battery. If battery is below required the voltage the electric starter may not
operate efficiently. If the battery becomes low you may need to use the kick starter.
ALTERNATOR
This motorcycle is equipped with a Denso Alternator.
Specifications:
Rated Voltage 12V
Rated Output 40A, 480W
Peak Output 560W @ 14V
Testing the Alternator on the Motorcycle
If no test bench is available, check the output of the alternator with the engine running.
Connect the voltmeter to positive and negative terminals of the storage battery
Start the engine
While starting the voltage will drop to as low as 9.5 V
At 3500-4000 rpm output voltage should be 13.5-14.5 VDC
In the course of daily inspection, check the fastening of wires to the alternator terminals
and fastening of the alternator on the engine crankcase.
ECU DATA PORT
The ECU Data port is located behind the right-
side panel. This data port is intended for:
DEALER ONLY EFI DIAGNOSTICS
The data port has a protective cap that should
be left in place to prevent debris from
contaminating the connector.
6-11