URAL Motorcycles cT 2022, Owner'S Manual

Page: 7 / 104

SERVICE RULES
1. Always wear proper safety equipment including but not limited to safety glasses
and gloves.
2. Allow your motorcycle to cool down completely prior to servicing to avoid getting
burned.
3. Always use genuine Ural or Ural recommended parts, fluids and components
when servicing your motorcycle. Parts that do not meet these requirements may
result in damage.
4. Follow the service procedures as outlined in this manual.
5. Always follow the torque specifications when tightening nuts and bolts.
6. Clean all parts with non-flammable solvents prior to reassembly after servicing.
7. Always replace seals, O-rings, gaskets and cotter pins when reassembling.
8. If you remove self-locking nuts they should always be replaced with new ones.
9. Be responsible with solvents, cleaners and waste oils. Always dispose of them in
accordance with your local regulations.
WARNING
IF THE ENGINE MUST BE RUNNING TO PREFORM A PARTICULAR SERVICE
PROCEEDURE BE SURE YOU ARE IN A WELL VENTALATED AREA. EXHAUST
CONTAINS CARBON MONOXIDE GAS.
WARNING
GASOLINE IS VERY FLAMMABLE AND CAN BE EXPLOSIVE UNDER CERTAIN
CONDITIONS. IT IS ALSO VERY HARMFUL TO THE SKIN AND EYES. DO NOT SMOKE OR
ALLOW SPARKS IN OR NEAR YOUR WORK AREA.
1-2