URAL Motorcycles cT 2022, Owner'S Manual

Page: 13 / 104

MOTORCYCLE STORAGE AND CARE
Storage
If you will be storing your motorcycle for the winter or long term, take the following
steps:
1. The motorcycle should be cleaned.
2. Check all fluid levels and add as necessary.
3. Check tire pressure.
4. Lubricate all shafts, splines, cables and joints.
5. Use a battery maintenance charger or disconnect battery.
6. Always store in a warm dry place to avoid rust and moisture build up.
7. Use a protective cover when needed.
After storage take the following steps prior to running your motorcycle:
1. Perform the pre-ride inspection.
2. Reconnect battery and/or disconnect charger.
3. Follow starting procedures.
4. Take the motorcycle for a short ride prior to any long trips.
CLEANING
It is important to maintain your motorcycle properly and clean it on a regular basis. Use
the following guidelines when washing your motorcycle:
Make sure the engine is completely cool
Use warm soapy water and wash thoroughly
Avoid water entering the air filter and electrical components
After washing, dry the motorcycle with a cloth
Lubricate joints and cables as necessary
Run motorcycle to evaporate remaining water
WINTER CONSIDERATIONS
Motorists in many areas experience the use of salt and other chemicals that are applied
to road surfaces in the winter. Salt and other caustic chemicals should always be washed
of you bike with fresh water as soon as possible to avoid rust and corrosion.
NOTE
RUSTED OR CORRODED PARTS CAUSED BY SALT ARE NOT COVERED BY WARRANTY.
1-8