15
6
Preperation for starting
1. Take any necessary measures to ensure that the electrical connections and cables cannot be
damaged.
2. The voltage and frequency must be checked in advance and must match the motor
specifications. This data is shown on the type plate of the motor.
3. Use of the motor without an overload protection switch is not permitted.
4. Check whether the motor connection matches the mains voltage. See the type plate for the
motor. Check the connections in the terminal box behind the control panel.
5. Check the direction of rotation of the pump.
6. Check the oil level in the drive unit (1).
7. Fill up pump housing with water.
8. Check suction and discharge pipes are correct and safe installed.
