TESTING THE TRAMPOLINE
16
TESTING THE TRAMPOLINE
After assembling the trampoline, it is important that you
perform the following safety checks:
Trampoline Safety Checks:
• Using a screw driver, check if all the bolts are tightly secured.
• Look under the trampoline and check all the springs are hooked securely to the
frame and triangle rings.
• Move the Trampoline around and check the sturdiness of the frame.
• Using your two hands, put your body weight on one section of the trampoline
and release to check that the floor is even.
• Inspect the cover pads and check if they completely cover the springs and frame.
• Make sure the strings of the pads are tied securely.
Enclosure Net Safety Checks:
• Hold onto the safety net and shake it to check that all the enclosure poles are
sturdy. Re-tighten any that seem loose.
• Check the safety net for any tears in the stitching or fabric.
• Check the enclosure net zipper and attached to the triangle ring under the
trampoline.
Once all the checks are performed and the trampolines has passed all the initial tests
(above), then have one person test the trampoline by jumping on the centre continuously
for 5 minutes. If the trampoline feels sturdy then your trampoline passes the test.
you have completed the
trampoline assembly!
Remember to abide by
all the safety rules.
Congratulations,
Have fun, play safe...
