SAFETY ENCLOSURE ASSEMBLY
14
Picture may vary slightly
with the different
trampoline models.
NOTE :
Two adults in good physical condition are required for
the following assembly. For your safety, you should
wear proper shoes and clothing. Failure to follow
these instructions and warnings may result in injury.
WARNING:
STEP 1 :
Lay out all parts prior to assembly. We recomment
that two people carry out the assembly.
STEP 2 :
Both ends of the upper pole have openings for
bolts, the end with the bigger hole is meant to
connect to the lower pole. Therefore insert the
lower pole into the upper pole at the end of the
upperpole where the screw opening is bigger.
Then place a screw in the hole at the connection.
Make sure the EPE foam is covering the poles.
STEP 3 :
Connect the pole cap (A) on the top of upper pole
(B). Repeat for each pole.
Refer to the picture to clearly see which way to
attach the pole cap, the opening of the pole cap
has to be on the same side as the outside bend of
the upper pole.
STEP 4 :
Cover all the poles with PVC sleeve (G)
STEP 5 :
Place the assembled poles with the opening of the
pole caps facing away from the trampoline, and
screw the poles into the trampoline frame with
pole bolts.
STEP 6 :
Connect the fiber glass frame using 4 pcs. of fiber
glass to make the long side, and 2 pcs. to make the
short side. So all together there should be 2 pcs.
for the short side and 2 pcs. for the long sides.
Refer to PARTS LIST for identification of parts.
