Step 3 - Trampoline Mat Assembly
How to use the Spring Pulling Tool
Be careful where you place your
hands during spring assembly as
connector points can pinch!
WARNING:
FRAME ASSEMBLY INSTRUCTIONS
11
When attaching the springs, attach to mat the end of the spring hooks
that is rounder.
NOTE :
1.
Lay out the Trampoline Mat
inside the frame.
2.
Connect all 4 corner springs
to the corner top rails.
Step 1:
Hook the more rounded end of the spring onto the
Trampoline mat's triangular rings.
Step 2:
Extend the spring pull tool and link it up with the
other end of the spring. Pull the tool in the direction
of the trampoline frame until the spring head is lined
up with the hole in the trampoline frame. Slide the
spring end into the hole as you remove the tool.
First connect
the 4 corner springs
Connect all middle
springs
Continue connecting
every few springs
Complete all the
rest of the springs
