CD0000435
Description
Value
Default value
No (0,0 °C)
Step
0,1 °C
Values
-3,0 °C to 3,0 °C
The indicator says "
no
" (correction value is zero) when the calibration
mode is entered for the first time. This means no calibration has been
performed yet.
Enter the reading on the thermometer using the keys
―
and
+
(step
of 0,1 °C).
The setting is validated with key
O
(OK).
5.13 Calibration of external room
sensor
Note
This menu is only displayed if the parameter "
rEG
" is set
with "
rS
" or "
rFt
".
Note
If the keys
―
and
+
are pressed simultaneously, the
sensor calibration is reset.
"
no
" is displayed
CD0000434
Description
Value
Default value
No (0,0 °C)
Step
0,1 °C
Values
-3,0 °C to 3,0 °C
The indicator says "
no
" (correction value is zero) when the calibration
mode is entered for the first time. This means no calibration has been
performed yet.
Enter the reading on the thermometer using the keys
―
and
+
(step
of 0,1 °C).
The setting is validated with key
O
(OK).
5.14 Lock keys and display
function
CD0000450
Value
Description
Yes
Activate the lock display and keys
No
Deactivate the lock display and keys
The “
lock keys and display function
” is used to lock the thermostat
keys and LCD display.
CD0000433
Lock keys and display
Follow the instruction below to activate the lock function of the
thermostat display and keys:
1.
Press the key
O
(OK) for
3 seconds
2.
Scroll up in the menu with the key
+
to
09 dls
3.
Select the desired menu by pressing the key
O
(OK)
4.
Change the displayed value "
no
" to "
Yes
" with the key
+
5.
Press the key
O
(OK) to confirm the settings
6.
Press the key
O
(OK) for
3 seconds
to return to the current
mode
7.
The lock icon on the display starts flashing
8.
After 5 minutes of inactivity, the lock icon stops flushing and the
thermostat is locked
Unlock keyboard and display
Temporary deactivation of the lock function
Follow the instruction below to temporarily deactivate the lock
function of the thermostat display and keys:
1.
Press the keys
―
and
+
during
5 seconds
. The lock icon starts
flashing.
2.
Make necessary changes in the setpoint, navigate in the settings
menu and change parametres.
3.
After 5 minutes of inactivity, the thermostat will automatically be
locked again.
Uponor Base thermostat display T-27 230V
|
Installation and operation manual
|
13
