Uponor T-27, Installation And Operation Manual

Page: 10 / 18

Item Icon Description
H Type of measured data and sensor used for system
regulation:
Room temperature sensor (rt)
Room temperature with external
floor sensor (rFt)
Remote temperature sensor (rS)
Display text
The following table contains an overview of all the display texts with
reference to the respective sections where they are described.
Display text Description Settings
menu
number
00.5 ECO mode setback temperature 03
CLd Cooling mode 01
Cmf Comfort mode 02
dls Lock keys and display function 09
Eco ECO mode 02
Err Error ―
FL.H High limitation of floor temperature 05
FL.L Low limitation of floor temperature 06
Hot Heating mode 01
HYS Hysteresis value 13
MAH Maximum heat
Maximum value of setting range of
the setpoint temperature
12
Min Minimum
Minimum value of setting range of
the setpoint temperature
11
Mod Mode
Heating/cooling modes
01
no Calibration of internal room sensor 07
no Calibration of external room sensor 08
rEG Regulation selection 04
rES Factory reset ―
rFt Room temperature with external
floor sensor 04
rS Remote sensor 04
rt Room temperature 04
U1.0 Software version 10
YES Yes 07/08
5.3 Display temperatures
(Comfort/ECO)
Follow below instructions to display the temperatures :
1. Press the key ― or + to see the setpoint
2. Press the key O (OK) to display the room temperature and floor
temperature (external sensor must be connected and the
regulation set to rFt)
5.4 Temperature setpoint
(Comfort/ECO)
The Comfort/ECO temperature setpoint is continuously monitored.
Follow below instructions to modify the temperature setpoints :
1. Press the key ― or + to see the current temperature setpoint
2. Press the key ― or + again to modify the setting temperature
3. Press the key O (OK) to confirm the temperature setpoint value
5.5 Settings
Note
After 1 minute of user inactivity in the settings menu, the
thermostat returns automatically to the current mode.
SI0000427
Settings menu overview
The following table contains an overview of all the settings with
reference to the respective sections where they are described.
Settings
menu
number Name Description
01 Mod Heating/cooling modes, Page 11
02 Eco Comfort/ECO modes, Page 11
03 Setback ECO mode setback temperature, Page 11
04 rEG Regulation selection, Page 12
05 FL.H High limitation of floor temperature, Page 12
06 FL.L Low limitation of floor temperature, Page 12
07 no Calibration of internal room sensor, Page 12
08 no Calibration of external room sensor, Page 13
09 dls Lock keys and display function, Page 13
10 U1.0 Software version, Page 14
11 Min Min. value of setting range of the setpoint
temperature, Page 14
10 | Uponor Base thermostat display T-27 230V | Installation and operation manual