14 – Outdoor temperature, fixed
14
C
This parameter is only available if parameter 13 –
Outdoor sensor selection is set to no.
Set a fixed outdoor temperature that is used to calculate
the supply temperature, when no outdoor sensor is
available.
To change this setting:
1. Use buttons
-
or
+
to change the parameter.
Default: 0.0 ˚C
Setting range: -49.0 – 50.0 ˚C, 0.1 ˚C increments
2. Press
OK
to confirm the change and return to the
system parameter settings.
15 – Wireless outdoor sensor configuration
15
This parameter is only available if parameter 13 –
Outdoor sensor selection is set to rF (Move PLUS only).
Register a wireless thermostat to the controller.
To register a thermostat:
1. Use buttons
-
or
+
to change the parameter to
INI
.
The controller is now set in wireless registration
mode.
15
2. Register the thermostat.
3. When the current room temperature is shown, press
the
OK
button to confirm the registration.
15
See section 6.9 Register a thermostat to the controller
for more information.
16 – Display unit
16
C
Select the temperature display unit used by the
controller.
To change this setting:
1. Use buttons
-
or
+
to toggle between
˚C
and
˚F
.
˚C
(Default) degrees Celsius
˚F
degrees Fahrenheit
2. Press
OK
to confirm the change and return to the
system parameter settings.
17 – Time unit
17
1 2 3 4 5 6 7
Select the time display unit used by the controller.
N OT E !
Do not attempt to set day and time in this
menu. It is not allowed, and the setting will
not be saved.
To change this setting:
1. Use buttons
-
or
+
to toggle between
24H
and
12H
.
24H
(Default) Use a 24 h display of time.
12H
Use a 12 h display of time, using AM and PM
icons to indicate time of day.
2. Press
OK
to confirm the change and return to the
system parameter settings.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
5 3
U P O N O R S M AT R I X M O V E / M O V E P L U S · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L