5 Install Uponor Smatrix Space controller
5.1 Placement of controller
Refer to the installation preparation guidelines (
see
section 4.2 Prepare for installation
), and use the
following guidelines when positioning the controller:
•
Position the controller just above the manifold.
Check the position of the 230 V AC power outlet, or
if required by local regulations, the junction box.
•
Check that the cover of the controller can be
removed easily.
•
Check that connectors and switches are easily
accessible.
5.2 Attach controller to the wall
The controller is delivered in a kit including screws and
wall plugs.
Screws and wall plugs
The figure below shows controller mounting hole
positions and how to attach it to the wall using screws
and wall plugs.
162 mm
5.3 Connect components to controller
Refer to the wiring diagram found in the end of this
document. The illustration below shows the inside of
the controller.
A
F G H
D E
B C
Item
Description
A
Uponor Smatrix Space Controller X-161
B
Registration button
C
LED, relay 1 activity
D
LED, relay 2 activity
E
LED, radio connection
F
Relay 1 connector, actuator
G
Relay 2 connector, heating/cooling output
H
Power connector,
230 V AC 50 Hz
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
1 2
U P O N O R S M AT R I X S PA C E / S PA C E P L U S · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
