manualshive.com logo in svg

Uponor SetPoint 521, Installation And Operation Manual

Share
Download
Uponor SetPoint 521 Installation And Operation Manual Download Page 7

Mounting the Thermostat

Using a Single Gang Box

Note: 

Adapter Plate (A3040012) is required (sold separately).

1. Feed the wiring through the hole in the Adapter Plate and the thermostat base.
2. Fasten the adaptor plate to the gang box.
3. Fasten the base of the thermostat to the Adaptor Plate.
4. Terminate wiring to the wiring strip.
5. Push the thermostat front onto the thermostat base.

3 

1

/

4

"

(83 mm)

Stud

Gang

Box

Thermostat

Front

Thermostat

Base

Adapter Plate

(A3040012)

Mounting Directly to the Wall

1. Drill holes and install the wall anchors.
2. Feed the wiring through the large hole in the thermostat base.
3. Fasten the thermostat base to the wall using the wood screws to the wall anchors.
4. Terminate wiring to the wiring strip.
5. Push the thermostat front onto the thermostat base.

Wall

Thermostat

Front

Thermostat

Base

5

SetPoint 521 Programmable Thermostat Installation and Operation Manual

Summary of Contents for SetPoint 521

































Reviews:

No comments

Brands by name

Popular brands

Load more brands