manualshive.com logo in svg

Uponor SetPoint 521, Installation And Operation Manual

Share
Download
Uponor SetPoint 521 Installation And Operation Manual Download Page 17

PRGM

MENU

PRGM

MENU

PRGM

MENU

PRGM

MENU

PRGM

MENU

Fan Menu

Setting

Display

Fan

Select if the fan should operate continuously (On) or only 
together with the heating or cooling equipment (Auto).

Access Level: Installer, User

Range: Auto or On

Conditions: Only available when FAN MODE is not set to OFF 
and a room temperature sensor is available.

Default: Auto

Symbols

Description

Heat On

Heat is turned on.

Cool On

Cooling is turned on.

Fan

The fan is turned on.

Mode Heat

The heating system is 
allowed to operate.

Mode Cool

The cooling system is 
allowed to operate.

Mode Off

The heating and cooling 
systems are off.

Sun

Schedule operating at 
the occupied tempera-
ture.

Symbols

Description

Moon

Schedule operating at 
the unoccupied tem-
perature.

Warning Symbol

Indicates an error 
is present.

Hold

Permanently holds the 
temperature and overrides 
the schedule.

Min

The floor is at or 
below the floor minimum 
temperature.

Max

The floor has reached 
the floor maximum 
temperature.

15

SetPoint 521 Programmable Thermostat Installation and Operation Manual

Summary of Contents for SetPoint 521

































Reviews:

No comments

Brands by name

Popular brands

Load more brands