Uponor Comfort Port EU l Technical Information l 5
EN
1.5 Variances and configuration
examples
Time
expenses [%]
Standard way
Uponor Comfort Port
6 %
Check content of delivered items
–
6 %
Select and configure material to the individual manifold
–
6 %
Bring material to the installation site
Bring material to the installation site
9 %
Unpack the cabinet, dismantle/store the door and the frame
–
9 %
Align and fasten the distribution cabinet
–
13 %
Installation of the manifold bars, heat meter sets, ball valves, etc. –
9 %
Check tightness
–
9 %
Assembly of the control and the actuators
–
7 %
Installation of a distribution or power socket
–
9 %
Wiring the actuators to the control units
–
9 %
Assing room sensors
Assing room sensors
5 %
Designation of the control circuits (option)
Designation of the control circuits (option)
3 %
Mount protective cover or mount frame, door and front sheet
Mount protective cover or mount frame, door and front sheet
1 Comfort
Port
approx. 150 minutes installation time
approx. 35 minutes installation time
About 9,800 different configuration can be assembled to one
complete Comfort Port unit. All they base and consists on general
components which ensure the perfect functionality. This general
components are:
• Stainless steel manifolds (2 – 16 loops) or polyamide manifolds
(2 – 15 loops)
• With lock shield valve or with flowmeter
• 2 different connection sets for heat meter
• With pump group (thermostatic control)
• With water meter sets
• Cabinet door made of sheet steel or plastic
• Uponor 230V and all Smatrix single room controllers (wired or
wireless)
All mentioned components can be preassembled in 3 different
cabinet types:
• In-wall Cabinet with depth 80 mm
• In-wall CAbinet with dept 110 mm
• On-wall Cabinet with depth 140 mm
The following examples show the 6 general variances of Comfort
Ports.
1.4 Cost comparison
Faster and safer installation including controls
When comparing the standard case (left in the table) with the use of
prefabricated Uponor Comfort Port distribution cabinets (on the right
in the table), the installation effort becomes visible.
Vertical w/o metering set
Uponor Vario S Manifold, 4 loops, with ball vale 3/4”, vertical
connection. In wall cabinet.
