297695
- END OF OPERATION
Flashing LED’s for particular washing stages indicate that the
program was completed.
• Washing machine door can be opened.
• Extract the laundry from the drum and remove any alien objects
from the door gasket.
• Leave the door ajar to allow the interior to dry.
• Close the water inlet faucet.
• Switch the machine off by turning the program selector to
position “0”.
• Pull the power lead from the socket and cut the power supply
from the mains.
• By the user
Own interruption
You may stop the program by turning the program selector to the
position “0”. If there is water in the drum select one of additional
programs (draining, spinning) to empty the water and terminate
the program.
PAUSE knob
By pressing the PAUSE knob (E) program may be suspended
at any time. After certain time you may open the door if there is
no water in the drum, otherwise this is not possible. Program is
continued by pressing the START knob (E).
• Failures
Program is suspended in case a failure occurs. These are
indicated by the
fl
ashing LEDs (see cf. Failures).
•
Power failure
At electric cutout the program is interrupted, however, after the
power supply has been re-established, the program operation
automatically proceeds.
If a power failure occurs when the drum is still full of
water, be careful not to open the door before you pump
the water out.
LOW POWER MODE
P o
= weighted power in ‘off mode’ [W]
0,07
P l
= weighted power in the ‘left on mode’ [W]
1,80
T l
= time in ‘left on mode’ [min]
10,0
Interruptions
59
Summary of Contents for PESUKARHU 6012
Page 1: ...PESUKARHU 6012 FI K ytt ohje SE Bruksanvisning GB User Manual...
Page 70: ...297695 70...
Page 71: ...297695 71...
Page 72: ...PS PG0A UPO 357 05 11...
