UPM Elite THM701, User Manual, Page: 31 / 40

Installing the Batteries and Selecting the Display in
°
C or
°
F
28
Please consult page 27 for guidelines on how it install the 3 “AA” size batteries (included) into the
thermostat following the polarity as marked. The LCD screen will immediately show the room temperature.
Please consult page 4 for instructions on how to select °C or °F.
CELSIUS DEFAULT: Since Celsius (°C) is the default mode no action is required to use the
thermostat in this mode.
(°C or °F) It is VERY IMPORTANT that you choose Fahrenheit (°F) before you begin using the
thermostat. If you proceed to set the clock and program settings with the default Celsius(°C)and
THEN change to the Fahrenheit (°F)setting: the clock, programs and all system settings will be deleted.
(SOFT RESET)If the display does not appear after installing the batteries, press the reset button on the
back of the unit.
(HARD RESET)To clear all system settings and return the unit to factory defaults press
and hold the LOCK tab, and at the same time, press and release the RESET button on the back of
the unit.
SEE OPTIONS SECTION: The thermostat has a number of OPTIONS which the user can change.
(NOTE: *Adjust these settings before programming the thermostat, because changing certain
options will erase all programming.)