UPM Elite THM701, User Manual, Page: 13 / 40

10
Fan Control / Automatic Ventilation
Select FAN/AUTO (for automatic control of the fan)
In heating mode, the fan is controlled by the heating equipment.
In cooling mode, the fan is controlled by the cooling equipment.
Select FAN/ON (for the fan to run continuously)
Select FAN/VENT (for automatic ventilation). (The fan will run five minutes per hour, this
ventilation feature is designed for better air flow, without heating or cooling being applied.)
Note: When the fan is running, the FAN symbol will flash.
System Mode:
AUTO
/
HEAT / OFF / COOL
AUTO - The heating or cooling system will activate according to pre-programed temperature settings.
HEAT - The system is in HEAT mode and furnace or heating system is activated.
OFF - If the thermostat is in the OFF mode, both the heating and cooling systems will be turned off,
and all programs and settings will be disabled.
COOL - The system is in COOL mode and air conditioner or cooling system is activated.
When the heating or cooling systems are ON, the following symbols will flash.
will flash when the heating system is running.
will flash when the cooling system is running.
.