UPM Elite THM701, User Manual, Page: 15 / 40

12
2
1
3
1
HOLD Function
This function will maintain a constant temperature indefinitely.
Select the HOLD tab (The HOLD symbol will flash to indicate HOLD is activated)
Press the UP / DOWN arrows beside the preset temperature to change the temperature.
*(The new temperature will then remain the same indefinitely until you select CANCEL)
HOLD UNTIL (Day)
If you wish to select a specific day to turn the HOLD feature off (rather than having it lasting indefinitely)
you may select the HOLD UNTIL day feature.
Select the HOLD tab (The HOLD symbol will flash to indicate HOLD is activated)
Select the HOLD tab again, (HOLD UNTIL will display below the weekdays) then select a WEEKDAY.
*(The selected day will be underlined)
*(The new temperature will then remain the same until midnight of the selected weekday)
To undo select CANCEL.
2
* Note: When these features are activated the words HOLD or HOLD UNTIL are displayed on the LCD.
Therefore it is not necessary to select OK to activate these features.