6
Horizontal hanging with tilt bracket
You can attach the IP24X15 BAR to a Truss or Pipe. Notice that the
tilt bracket(106mm) should face down from the hanging structure. Use the centered holes in the Tilt
Bracket. You can use the additional fix Omega Brackets to hang the device horizontal.
Hanging Vertically “dropped”
Use the vertical Adapter set (including Omega Bracket, optional accessory) to “drop” the IP24X15
BAR from a rigging structure.Notice that we will release a
detailed rigging manual for the different options shortly.
Vertical Installation on the floor
Use the vertical Adapter (optional accessory) in combination with a base plate (optional accessory
). Use the Small standing plate (optional accessory) if
you only wish to install one
IP24X15 BAR. If you want to install more than one
device, screw the Small standing plate to a normal truss base plate. We have two kinds of
standing plate, fixed and infinite rotating, for your options.
Notice that we will release a detailed rigging manual for the different options
shortly.
Safety attachment
In any case of rigging the device attach the Safety rope to any of the dedicated eyelets integrated i
nto the sliding brackets.
(Length of Omega & Safety cable position)
