5
3.
Installation
Your IP24X15 BAR can be installed in every kind of following positions.
Please see the explanations and rely to the instructions for a safe operation and secure handling.
Structural Connection
The IP24X15 BAR can be connected using the included quick-release pins. Place the devices next
to each other.
(Insert both Pins to connect the devices)
For the first uses this may be a little hard. Move the devices a little until the Bolts can be inserted
completely. For vertical installation do not exceed the amount of 4 pieces. (caution, provisional
specification) In case of hanging installation, each device needs to be saved individually! Using the
quick-release pins for horizontal installation is not recommended. Each device should individually
be installed with the given installation options below.
Horizontal Installation on the floor
You could place the IP24X15 BAR on the floor by 2 stands. Please make sure the surface is plane
and the reliability of the floor is sufficient.
