Hardware installation
Connecting management Ethernet
To manage the appliance and attached devices in-band through the network, connect the
management Ethernet port on the front panel to your Ethernet network. Speed and duplexing
default to autonegotiation.
If you have purchased this capability, you may wish to make a secondary management
Ethernet connection through the AUX port, to the left of the power controller connector. The
main and secondary management Ethernet connections must be on the same subnet, but can
be through separate switches for redundancy.
Connecting devices to be managed
Connect the console ports of up to four network devices to the four serial ports (1/1 through
1/4) on the appliance.
Connecting a hardware authenticator
For automatic one-time password authentication during out-of-band operation, connect an
RSA® SecurID® SID800 hardware authenticator to one of the USB ports.
18
Installation Guide for Uplogix Secure Remote Management Appliances
