PLACEMENT IN THE CHAIR
Generally, the Uplift Seat Assist should overhang
the front of the chair as shown. On chairs which
are very deep, it is permissible to position the
cushion further back. When using the Uplift, keep
both hands on the arms of the chair (or other
suitable support).
Note: The Uplift Seat Assist should overhang as
shown when used on a hard chair.
GETTING UP WITH UPLIFT
When you are ready to stand, simply start to get up like you
normally would, by leaning slightly forward and pushing off with
your arms and legs. Uplift will sense you are getting up and give
you a slow and gentle lift up.
SITTING DOWN WITH UPLIFT
After adjusting the weight settings and placing the Uplift on your
chair, sit down on the flat part at the top of the cushion. The Uplift
will ease you slowly and gently into your chair.
Note: If the cushion does not go down when you sit on it, re-adjust the
weight setting to a lower weight.
The cover on your Uplift Seat Assist is made of a
washable, waterproof fabric and can be removed and
machine washed in cool water (hang to dry).
The surface of the Uplift cushion is coated with a
special water resistant coating. This may be sponge
cleaned with mild soap or detergent.
Note: Never totally immerse your Uplift
Seat Assist in water.
To put on the cover after cleaning:
Adjust the weight setting on your Uplift
Seat Assist and place it on a table with the
open end facing away from you.
Place the end of the
cover with the tag
over the back or top
of the cushion and
pull it down and
under the front edge.
Note: The back or top end of the cover is made wider
than the front to ensure proper fit. It is best to leave
all or part of the tag on your cover so that it is easy
to identify this back/top end in the future.
CARING FOR YOUR SEAT ASSIST
1
2
3
1
2
3
1
2
