© UPLIFT Desk
• 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com
8
Step 2
Move the third Wall assembly into place forming the
T-Joint configuration. Line up the remaining holes of
the T-Bracket with the holes in the post of the third
Wall assembly and attach using four M5x25 Machine
screws.
Step 2
Move a third Wall assembly into place forming a
T-Joint configuration and attach it to the 4-Way
Bracket using four M5x25 Machine screws.
Finally, move the fourth Wall assembly into place to
form an X and attach it to the 4-Way Bracket using
four more M5x25 Machine screws.
Step 3
Now attach a Lower L-Bracket to the bottom of the
posts at each of the inside corners using four M5x25
Machine screws per L-Bracket.
2x
Corners - 4-Way Connector
Parts Needed:
4-Way Bracket
(qty 1, per assembly)
M5x25 Machine screw
(qty 24, per assembly)
Lower L-Bracket
(qty 2, per assembly)
Step 1
Again, with the help of a friend, hold two completed
Cubicle Wall assemblies together to form a right an-
gle like you are making an L-Joint or a T-Joint. Then
line up a 4-Way Bracket with the holes of one of the
posts and attach it using four M5x25 Machine screws.
Next, line up the holes with the post of the second
Wall assembly and attach using four more M5x25 Ma-
chine screws.
