© UPLIFT Desk
• 1-800-349-3839 • [email protected] • www.upliftdesk.com
Step 10
(Optional)
We have pre-adjusted the tension for you. However, you may
need to make adjustments once equipment, such as monitors
and keyboards, are placed on the unit.
To adjust the lift to the exact amount of weight you place on it;
lower the unit until the main support column is at a 45° angle.
Using the larger Allen wrench (Part G) and the tension adjustment
bolt on the rear of the unit, adjust the tension for smooth operation.
Turn clockwise (towards the -) to lessen the tension or
counterclockwise (towards the +) to increase it.
45°
•
•
•
The maximum load capacity of the UPLIFT Adapt
Clamp™ is 28.6 lbs. Do not overload.
Failing to follow these assembly instructions
and safety precautions may result in personal injury.
Failing to follow these assembly instructions
and safety precautions voids your warranty
and may result in property damage.
CAUTION
!
Copyright Notice:
This guide is a component of the UPLIFT Adapt Clamp™. This guide is a part of the scope of delivery, even if the item is resold. This guide is also avail-
able on the UPLIFT Desk website: upliftdesk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form without the prior written
consent of UPLIFT Desk.
These instructions are subject to United States copyright law.
©
Step 11
(Optional)
If you prefer to use your UPLIFT Adapt without a wrist rest, remove
the bolts beneath it using the smaller Allen wrench (Part H).
