© UPLIFT Desk
• 1-800-349-3839 • [email protected] • www.upliftdesk.com
Step 7
Attach the lifting mechanism to the clamp using four of
the included M6*8 bolts (Part I) and the small Allen wrench.
Use two more M6*8 bolts to attach the lifting mechanism
to the angled brace.
Step 8
Line up the holes on the plate of the keyboard tray (Part B)
with the holes on the vertical connector under the main assembly’s
work surface.
Attach keyboard tray to the main assembly using two M6*8 bolts
(Part I) and tighten using the small Allen wrench (Part H).
Optional:
Cover the bolts with the adhesive bolt covers (Part F)
by centering the sticky side on the heads of the exposed bolts.
Adhere the pad around the bolt by pressing all around the bolt.
This will prevent scratches to your desktop.
Step 9
Adjust the height of the unit by squeezing the release paddle and
moving to desired position. Release the paddle to lock in place.
