© UPLIFT Desk
• 1-800-349-3839 • [email protected] • www.upliftdesk.com
5
13
I.
Secure the Center rails at both ends using
eight (8) M6x10 Machine screws (part 13), four
(4) per side. Ensure all eight (8) Machine screws
hit the metal Crossbar rails to prevent them
from sliding.
Double-check that the frame is properly positioned
on the underside of the desktop.
Attach the frame assembly to the underside of the
desktop using eight (8) of the screws that you have chosen.
J.
Choose the screw to fasten your frame to your desktop.
If your desktop does not have metal threaded inserts,
use the #10x5/8’’ Wood screws (part 14-a)
If your desktop
does
have metal threaded inserts,
use the #10-24x5/8’’ Machine screws (part 14-b)
3 per Side bracket
6 total
1 per Crossbar end
2 total
a
b
14
14
N.
Turn the assembled table right-side up. With two people, grab the table by the frame and desktop
equally, and turn the table right-side up. Adjust the Leveling studs (part 9) on the Feet (part 2) as needed.
Copyright Notice:
This guide is a component of the UPLIFT Desk™. This guide is a part of the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT
Desk website: upliftdesk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk.
These instructions are subject to United States copyright law.
©
Following table assembly, adjust the Leveling studs or casters (sold separately) on the feet so that the
table is level and does not shift its position.
When moving the table, if casters are not installed, use a two-person lift and lift the table so that it can be
moved without dragging. Dragging the table may cause the frame and screws to pull loose from the desktop.
When moving the table, DO NOT lift the table by the desktop alone, or the frame, alone. Support both the
frame and the desktop equally. Favoring one over the other can stress the fasteners connecting the table
frame to the desktop. Lower the table completely and lift the table by grasping the frame.
5. PLACEMENT
Height
28” (without desktop)
Width Range
42.125” min - 74.75” max
Weight Capacity
355 lbs
6. TECHNICAL SPECIFICATIONS
