© UPLIFT Desk
• 1-800-349-3839 • [email protected] • www.upliftdesk.com
2
This table is designed for use in dry work areas only. These tables are designed only for the purposes
included in this manual. They should not be used in environments with high humidity or dampness.
Any other use is at user’s risk.
Do not sit or stand on the table frame.
Children should never use the table unless they are supervised by adults.
Liability:
Under no circumstances does the manufacturer accept warranty claims or liability claims for
damages caused from improper use or handling of the table frame other than that which is described
in this operation manual.
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using the table.
FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY, AND OPERATION INSTRUCTIONS
AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS PROPERTY
DAMAGE OR BODILY INJURY.
WARNING -
To reduce the risk of injury to persons, or property damage:
• Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled
persons.
• Use this table only for its intended use as described in these instructions. Do not use attachments
not recommended by the manufacturer.
• Do not use outdoors.
• Inappropriate use of this product may cause property or bodily injury.
• Please provide this manual to any users, installers, or support personnel using the product.
• If casters are not installed, use a two-person lift and lift the table so that it can be moved without
dragging. Dragging the table may cause the frame and screws to pull loose from the desktop.
• Maximum weight capacity of this product is 355 Ib. Do not overload your table.
2. USAGE
1. SAFETY AND WARNINGS
Foot
(qty 2)
Leg
(qty 2)
Adhesive pads
(qty 10)
Leveling stud
(pre-installed, qty 4)
M6x10
Machine screw
(qty 8)
#10x5/8’’
Wood screw
(qty 12)
#10-24x5/8’’
Machine screw
(qty 8)
Crossbar end
(qty 2)
Crossbar rail
(qty 2)
Side bracket
(qty 2)
M6x14
Machine screw
(qty 24)
Philips Head Screwdriver
and/or Power Drill
Tape Measure
Allen wrench
(included)
Tools required
Components
1
2
3
4
5
6
7
8
9
10
10
a
b
3. PARTS LIST
