background image

 

 

UC-IRD+ MULTI-MODE RECEIVER / DECODER

 

 

 

18 

5.

 

Mux TS (Only available if it is enabled) 

6.

 

BISS De-Encrypted 

Mode: Select the mode of IP Streaming. The valid options are DVB or 

IPTV 

DVB Mode: The transport stream from the source will be directly 
sent as an IP stream. The IP stream will include all the programs 

and will be sent to the specified multicast or unicast IP Address. 

 
IPTV Mode: The transport stream from the source is de-Muxed into 

individual programs, each of one is packed into a different IP 
stream. Each IP stream carries only one program. There is a 

maximum of 6 IPTV channels allowed to be set. 

 

Uni/Multicast Setup: This sub-menu will allow you to set the Unicast or 

Multicast settings. It offers different options depending on the mode 

selected. 
 

For   DVB   Mode:   

Multicast IP: set the IP address of the TS over IP. It can be 

configured as a Multicast or Unicast stream. 

 
To use multicast mode set the IP address within the Multicast IP 

range 224.0.0.0 to 239.255.255.255 as defined by RFC 5771. 

 
To use Unicast mode use any valid IP address that is not in the 

range 224.0.0.0 to 239.255.255.255. When the IP address is set to 

an IP address outside of this range the stream will be Unicast even 
though the display shows “Multicast IP”. In Unicast mode the IP 

address that is used is the one of the destination. 
 

 

Multicast UDP Port: Enter the UDP port number of the TS over IP. 
 

 

For   IPTV   Mode:   

Max Channels (<=6): Set the number of IPTV channels. The valid 

range is from 0 to 6. 
 

Once the number of channels is set, there will be a sub-menu for 

each channel. Each channel sub-menu has 4 options: 

Summary of Contents for UC-IRD+










































Reviews: