UC-IRD+ MULTI-MODE RECEIVER / DECODER
10
Stream Gateway: Enter the gateway address for the IP address assigned
to your equipment TS/IP input.
Stream MAC Address: The Factory-Set MAC address assigned to the TS/IP
port.
Multicast IP Address: Enter the multicast IP address of the Transport
Stream source.
Multicast UDP Port: Enter the UDP port of the Transport Stream source.
Protocol: Select the multicast protocol: UDP or RTP.
Output Smoothing: Set the quality of the Transport Stream that arrives to
TS/IP input
Auto: detects the bit rate.
Disable: the equipment lets the Transport Stream to pass by.
Fixed Rate: use a fixed bit rate.
Setting Up the Common Interface (De-‐Scrambling)
This menu allows you to configure the Common Interface for inbound De-
Scrambling.
NOTE: Configure either the Satellite Inbound or Ethernet Inbound first
and make sure the input is locked to use it as your CI Source
Operations Sequence:
Click “ENTER” to enter the “Outputs” menu, select “CI” then click “ENTER”.
The display will show something like this:
There are 3 options to setup on this menu.
CI Source
1-TUNER
