
UC-IRD+ MULTI-MODE RECEIVER / DECODER
17
NOTE: This option only will be available if it is enabled on System-
>Optional Function. All the other configurations must be done before like
BISS, CI, and Input configurations.
Operations Sequence:
Click “ENTER” to enter the “Outputs” menu, select “Ethernet” then click
“ENTER”. The display will show something like this:
There are different options to setup on this menu.
Stream IP Address: Enter the IP address assigned to your equipment
TS/IP output.
Stream Netmask: Enter the network netmask for the IP address assigned
to your equipment TS/IP output.
Stream Gateway: Enter the gateway address for the IP address assigned
to your equipment TS/IP output.
Stream MAC Address: The Factory-Set MAC address assigned to the TS/IP
port.
Gateway MAC Address: The MAC address of the configured Gateway.
Protocol: Set the protocol for multicast. The possible options are UDP or
RTP
TS Pkts per UDP: Set the number of the TS packets encapsulated in one
UDP packet. Valid range is from 1 to 7
Time to Live: set the number of router hops over which the TS over IP
can be delivered. The valid range is from 1 to 5.
Type of Service: Select the type of service. The possible options are:
Normal, Min Monetary Cost, Max Reliability, Max Throughput or Min Delay.
Source: Select de source of the stream to be encapsulated over IP. There
are 5 possible options
1.
ASI1 Input
2.
ASI2 Input
3.
CI De-Encrypted
4.
TUNER
Stream IP Address
16.16.16.16