UC-350E+ Encoder User’s Manual
21
3.2.3.6 Output Mode Setting
This sub-menu will allow the user to select between MPTS and Encoder output modes.
Selecting ‘Encoder’ (SPTS) means the outgoing stream will only have one program.
3.6 Output Mode 01/01
[ MPTS ] Encoder
3.2.3.7 ASI Output Setting
This sub-menu will allow the user to select the ASI Output content.
3.7 A SI Output 01/02
[ MPTS] Encoder
3.2.4 Network Settings
This sub-menu will allow the user to configure the Encoder’s network parameters.
4.1 IP A ddress
192.168.000.136
4. 2 Subnet Mask
255.255.255.000
4.3 Gateway
192.168.002.001
4.4 C onsole A ddress
192.168.002.211
3.2.4.1 MAC Address Setting
This sub-menu will allow the user to check the unit’s Network Interface Card MAC
address. This value is read-only and cannot be changed here.
