Page 4 of 4
Assemble Header (G) using
Push Pins (K). Set Header (G)
into slots in top of Top Plate (D).
Remove masking from the adhesive strip
on the underside of the Header Clip (J).
Place
Header Clip (J) onto the center of
the
Top Plate (D) and insert signage
into
Header Clip (J).
NOTE:There are different header styles that are available, please follow the appropriate instructions.
Without removing the Wire Assembly Helper (E),
install
Top Plate (D) over slots on top of
Racks (F) and attach with (8) Screws (H).
Install (56) Card Divider Clips (I) on front edges of
Card Racks (F).
Note: Do not remove Wire Assembly Helper.
H
K
J
D
E
F
D
D
G
I
A
B
ASSEMBLY
5
6
7
