![background image](http://html.mh-extra.com/html/uovision/panda-uv535/panda-uv535_user-manual_1060478006.webp)
Page 3
2. Quick Start Guide
2.1
Power Supply
To supply power for the camera,
8
size AA batteries are needed.
Confirm that the power switch is in the OFF position; load the fully
charged batteries into the pack according the polarities signs shown
below. The following batteries with 1.5V output can be used:
1.
High-density
and
high-performance
alkaline
batteries
(Recommended)
2.
Rechargeable alkaline batteries
3.
Rechargeable NiMH batteries
There are 4 battery slots. Slot 1 and 2 form one group and is
marked “1”,slot 3 and 4 form the other group and is marked “2”. Only
one “group” of batteries is needed to supply power for the camera, but
both can be used and is recommended.
2.2
Insert the SD-card
Open the bottom cover.
Insert an SD-card into the card slot with
unmarked side upwards. Please note that the SD-card is on the
“write” (not locked) position, otherwise the camera will not function
correctly. Please do not use micro SD cards with adapter.