Scales - Models 410 and 520
— Set Up
2-17
Hitch Assembly
1. Remove the snap rings and pin. Then remove hitch casting and hitch pin.
2. Remove hex nut, lock washer and capscrew.
3. Remove standard hitch and replace with scale hitch bar, making sure to feed the scale wire
through the conduit to the J-Block.
NOTE: The bending direction decal on the end of the bar should point up. Also, the hitch bar
should be installed with the serial number decal facing up.
4. Reusing the capscrew, lock washer and hex nut, assemble the scale hitch bar to the tongue.
5. Reattach the hitch casting to the scale hitch bar using hitch pin and snap rings.
Scale Kit Installation — 5-Point Scales
(continued)
Walking Tandems & Steerable Tandems
Brent Models:
1594, 1596 with Steerable Tandem
Replace Standard Hitch with Scale Hitch Weigh Bar 3 3/4” Dia. (9004910)
2096 with Steerable Tandem
Replace Standard Hitch with Scale Hitch Weigh Bar 3 3/4” Dia.
(9004913 - Indicator 410; 9008135 - Indicator 520)
1194, 1196, 1282, 1394, 1396
with Walking Tandem
Replace Standard Hitch with Scale Hitch Weigh Bar 3 3/4” Dia. (9004910)
Unverferth Models:
860, 1015, 1050, 1060, 1110, 1115,
1117, 1119, 1120, 1320, 1160, 1310,
1315, 1317, 1319, 1519 with Walking
Tandem
Replace Standard Hitch with Scale Hitch Weigh Bar 3 3/4” Dia. (9004910)
2020 with In-Line Tandem
CAT 4 - Scale Hitch Weigh Bar 3 3/4” Dia. (9004910);
CAT 5 - Scale Hitch Weigh Bar 3 3/4” Dia. (9008119)
Killbros Models:
1111, 1311, 1113, 1313 with Walking
Tandem
Replace Standard Hitch with Scale Hitch Weigh Bar 3 3/4” Dia. (9004910)
Parker Models:
1152, 1348, 1352, 1154, 1354 with
Walking Tandem
Replace Standard Hitch with Scale Hitch Weigh Bar 3 3/4” Dia. (9004910)