Unverferth UM410 Installation And Parts Download Page 30

Page: 30 / 104

Scales - Models 410 and 520

— Set Up

2-20

Hitch Assembly

1. Remove the snap rings and pin. Then remove hitch casting and hitch pin.

2. Remove hex nut, lock washer and capscrew.

3. Standard hitch can be removed and replace with scale hitch bar, making sure to feed the

scale wire through the conduit to the J-Block.

NOTE: The bending direction decal on the end of the bar should point up. Also, the hitch bar

should be installed with the serial number decal facing up.

4. Reusing the capscrew, lock washer and hex nut, assemble the scale hitch bar to the tongue.

5. Reattach the hitch casting to the scale hitch bar using hitch pin and snap rings.

Scale Kit Installation — 5-Point Scales

(continued)

Tracks

Brent Models:

1082, 1182, 1186, 1194, 1196, 1282,
1386, 1394, 1396, 1594, 1596, 2096,
V800, V1000, V1100, V1300, V1500
with Tracks

Replace Standard Hitch with Scale Hitch Weigh Bar 3 3/4” Dia. (9004910)

Unverferth Models:

860, 1015, 1017, 1019, 1050, 1060,
1110, 1115, 1117, 1119, 1160, 1310,
1315, 1317, 1319, 1519, 1610, 1120,
1320, 1620, 2020 with Tracks

Replace Standard Hitch with Scale Hitch Weigh Bar 3 3/4” Dia. (9004910)

Killbros Models:

835, 1035, 1135, 1111, 1311, 1113,
1313, 1613 with Tracks

Replace Standard Hitch with Scale Hitch Weigh Bar 3 3/4” Dia. (9004910)

Parker Models:

842, 1042, 1142, 1139, 1348, 1154,
1354, 1654 with Tracks

Replace Standard Hitch with Scale Hitch Weigh Bar 3 3/4” Dia. (9004910)

1048 with Tracks

Replace Standard Hitch with Scale Hitch Weigh Bar 2 7/8” Dia. (9004903)

Summary of Contents for UM410









































































































Search results

Summary of Contents for UM410

Reviews:

Unverferth UM410, Installation And Parts, Page: 30 / 104

Search results

Summary of Contents for UM410

Reviews: